Code: FNR75W1HDGAL

Length: 75mm x 3.15mm

Quantity:  4000

SIFCO® 75mm x 3.15mm Hot Dip Galvanised Face nailing Ring shank coil nails for use in MAX® CN890S, HN75-ST & HN90-ST air nailers.

The SIFCO® FNR75W1HDGAL coil nails are plastic collated helical shank steel exterior cladding nails with a face nailing head manufactured by SIFCO® from 75mm x 3.15mm steel nails with a Hot Dipped Galvanised coating.

Specifications as follows:

• Shank size: 3.15mm (+- 0.05mm),
• Nails length: 75mm,
• Head size: 6.0mm (+- 0.05mm),
• Annular groove ring coverage: 85%,
• Galvanising thickness: 17 to 20 um,
• Salt spray test: 200 to 250 hours.

 PRODUCT USE

SIFCO® FNR75W1HDGAL coil nails are designed and manufactured for use in the fixing of decking timber, wooden exterior weatherboards & other cladding, wooden sarking to timber frame buildings.

The fixing shall be carried out at the spacing specified by the exterior weather board supplier and using only equipment approved by SIFCO® and operated by appropriately qualified staff.

MAX® FNR75W1HDGAL coil nails are primarily intended for use in areas outside the New Zealand salt spray zone and other corrosive environments as detailed in section 4 of the NZS3604:2012